How do I fix error code E HS on a LG refrigerators?

1. undefined: Check each sensor connector for loose or disconnected wiring. 2. undefined: Check humidity sensor resistance. Short (0 ohm) or open (OL) indicates failed sensor — replace sensor. 3. undefined: If sensor resistance is normal, check connector at Main PCB. 4. undefined: Replace Main PCB if all sensor and wiring checks pass.

LG Refrigerators

Error Code E HS

Humidity Sensor Error

Moderate

Address soon - your appliance may not work properly

Also displayed as: HS E

How to Fix

1
Check each sensor connector for loose or disconnected wiring.
2
Check humidity sensor resistance. Short (0 ohm) or open (OL) indicates failed sensor — replace sensor.
3
If sensor resistance is normal, check connector at Main PCB.
4
Replace Main PCB if all sensor and wiring checks pass.

This Error Applies To

LG LRMDS3006D Series Refrigerators

Service manual exact match: LRMDS3006DService manual exact match: LRMDS3006SService manual exact match: LRMVS3006DService manual exact match: LRMVS3006S